Calibrating the Cameras
The following procedure explains how to calibrate the cameras in the latest version of SMART
Board software and replaces the information given on pages 49-50 of the 2000i installation guide.
To calibrate the cameras
1. Press the SMART Board icon in the system tray (Windows computers) or in the Dock
(Macintosh computers), and select Control Panel.
2. Press SMART Board Settings.
3. Select Advanced Settings from the list.
The Edit Advanced Board Settings dialog appears.
4. In DViT Settings, press the Calibrate button.
The 4-point calibration screen appears.
5. Press the center of each target and hold until the target moves.
After you press the final target, the orientation screen appears.
6. Complete the 4-point orientation.
7. Press OK.
Maintenance and Troubleshooting
49