Smart Technologies 2000i-DVX Installation Manual page 36

NOTE: To access the two screws at the front of the projector, you must reach through the view
port to the front of the projector, and maneuver the security key through the two access holes
in the projector cover (see the following figure).
NOTE: As you maneuver the security key through these two access holes, watch it from the
back to see when it engages with the screws.
3. Slide the projector backward or forward to alter the image size.
4. When the image is the correct size, tighten the three screws.
NOTE: Screen removed for clarity
Finalizing the Installation
×
1
25