Starting The Terminal; Aligning The Screen - Symbol PDT 8000 Series Quick Reference Manual

P D T

Starting the Terminal

Press the red power button to turn the terminal on. If the terminal
does not power on see
Power
Button
As the terminal initializes its unique Flash File system, the Symbol
splash screen displays for about 60 seconds. When the Welcome
screen appears, tap anywhere on the screen to continue to the
Align screen. Note that these screens also appear every time you
perform a hard reset.

Aligning the Screen

To align your terminal so the cursor on the touch screen aligns with
the tip of your stylus:
1. If necessary, adjust the contrast on the terminal so the
screen is readable (see
2. Remove the stylus from the handstrap of the terminal.
8 0 0 0
Troubleshooting on page
Adjusting the Backlight on page
10
S e r i e s
25.
11).