Message
No device is connected to the input terminals.
The input terminal is connected but there is no signal.
A video signal that cannot be used in this unit has been connected.
*The names of input terminals such as COMP. will be displayed in yellow.
This message is displayed when the accumulated lamp time has exceeded 2900 hours.
To clear the message, press the [Back] button.
Input appropriate video signals from compatible sources.
Input video signals that can be used.
Prepare a new lamp unit and replace it as soon as possible. Reset the lamp time
after replacing the lamp. (Reference page: 62 to 65)
SDC-15
Error Messages
Cause (Details)
69