Projector Mounting; Mounting Precautions - Wolf SDC-15 User Manual

SDC-15

Projector Mounting

Measures to prevent the unit from toppling or dropping should be used for safety reasons and accident prevention.
When mounting this unit on a pedestal or ceiling, use all the 4 screw holes provided (M5 screws) to mount.
Ceiling

Mounting Precautions

• Special expertise and techniques are required when mounting this unit. Be sure to ask your Wolf Cinema dealer to perform
all desired mounting.
• Depth of the screw holes (screw length) is 23 mm. Use screws shorter than 23 mm but longer than 13 mm. Using
non-compliant screws may result in malfunctions or cause the unit to drop.
• When mounting to a pedestal, ensure sufficient space (foot height of 10 mm or higher) around the unit so that the air inlets
are not blocked.
• Do not tilt this unit more than ±5 degrees from side to side when using.
• Regardless whether the unit is still under warranty, Wolf Cinema is not liable for any product damage caused by improper
mounting, or mounting the unit with non-compliant Wolf Cinema ceiling mounting hardware, or when the environment is not
suitable for ceiling mounting.
• When hanging from a ceiling, pay attention to the surrounding temperature. Note that during colder seasons and whenever
a room heater is in use, temperature around the ceiling will be higher than expected and may damage the projector.
24
1080p D-ILA 3D Front Projector
Bottom Surface
Air Inlets
User's Manual
4 x M5 Screws