Table of Contents
Advertisement
SDC-15
Please Be Careful During Use
CAUTION
This unit uses a projection lamp, which will get hot when in use. Please refrain from projecting in the following circum-
stances, otherwise, fire or serious malfunctions may occur:
• Projection while lying on its side.
Avoid projection if the installation of the unit is done at an excessive angle of more than ± 30 °. This may reduce
life of the lamp and cause unwanted color shading.
• Avoid projection at any location where the air vents or exhaust ports might get blocked.
Consult with your Wolf Cinema installer as to the optimum screen surface to use with this projector. Note that certain
perforated or woven "acoustic transparent" screens may result in visual interference patterns with the pixel array of the
D-ILA light engine components. One way to reduce any unwanted interference pattern is to change the size of the
screen, or type of screen surface, so that any interference patterns will be less noticeable.
Inclination Adjustment for this Projector
How to Adjust the Vertical Angle
Height and inclination of the unit (0 ~ 5mm) can be adjusted by rotating its feet. Lift the unit and adjust the four feet.
Stand
Extend
22
1080p D-ILA 3D Front Projector
Contract
User's Manual
Advertisement
Table of Contents
