Wolf SDC-15 User Manual page 51

SDC-15
1-2 Advanced
Sharpness Adjust sharpness and detail enhancement via "[1-2-1] Sharpness" of the submenu.
NR Reduces unwanted noise in the video image. Adjust to preference.
RNR Adjusts the intensity of random noise elimination of the image.
Values: (Low) 0 to16 (strong)
MNR Adjusts the intensity of mosquito noise elimination of the image.
(*) It is not possible to set when the "Picture Mode" is set to "3D".
Moreover, it is not possible to set it on certain HD signals.
Values: (Low) 0 to16 (strong)
BNR Reduces the block noise of the video images.
(*) It is not possible to set when the "Picture Mode" is set to "3D".
Moreover, it is not possible to set it on certain HD signals.
Settings: On, Off
Color Space You can switch the color space as displayed by the projector.
Settings: Standard, Wide 1, Wide 2
Equivalent to the HDTV color space.
Standard
Wide 1 Equivalent to the color space of the DCI standard.
Wide 2 A color space that is broader than Wide1
Custom Gamma It is possible to create and save custom gamma curves. Adjust to your preference.
To "[1-2-2] Custom Gamma" of the submenu.
Color Management It is possible to adjust and save desired color space calibrations.
To "[1-2-3] Color Management" of the submenu.
Clear Motion Drive This setting improves scenes with fast motion, helping to produce clearer images with little residual image retention.
For PC and 3D signals, the "Clear motion Drive" cannot be used.
On occasions the image may appear distorted in some scenes, or light and dark flashes might occur. In this case, please choose
"Off", and then a setting of your choice.
Settings: Off, Mode 1, Mode 2, Mode 3, Mode 4, Inverse Telecine
Off Off
Mode 1 Black insertion weak
Mode 2 Black interpolation strong
Mode 3 Interpolation weak
Mode 4 Interpolation strong
Inverse Telecine With 60i/60p signals, e.g of TV-broadcast and DVDs, original 24 frame video image footage is changed to a 24 frame display.
(*) 24p will not function.
CMD Demo It is possible to visually confirm the effects of the settings in Mode 3 and Mode 4 of the Clear Motion Drive. Upon pressing the button
"OK", it will be displayed on all sides of a screen in the center split into two parts. Finally, it will turn to "Off". It cannot be set for PC
and 3D signals.
Settings: Left -> right -> top -> Bottom -> Off (changed with "OK" button)
Left The left screen displays a demonstration of the Clear motion drive.
Right The right screen displays a demonstration of the Clear motion drive.
Top The upper screen displays a demo of the Clear motion drive.
Bottom The screen below displays a demo of the Clear motion drive.
Off The Demo of the Clear motion drive is turned off.
Lens Aperture Adjusts the optical iris and aperture setting. A setting of 0 means fully opened.
Settings: (Dark) -15 to 0 (bright)
50
1080p D-ILA 3D Front Projector User's Manual
[0]
[0]
[Off]
[Off]
[Off]
[0]