Table of Contents
Advertisement
SDC-15
4 Display Setup
Back Color
Sets the background color when no input signal is detected.
Settings: Blue, Black
Blue
Sets the background color to blue.
Black
Sets the background color to black.
Menu Position
Sets the position of the on-screen menu. By pressing the [OK] button, an image illustration appears at the position
of the menu. The highlighted position in the illustration can be moved via the left and right keys. If one presses [OK],
the menu moves to the highlighted position.
If you press the key to the right, the menu will move starting from the top left -> top right -> central -> bottom right
-> bottom left and then back to the upper left.
By pressing of the left key, the menu moves in the opposite direction.
Menu Display
Determines the length of time to display the menu.
Settings: 15 sec, On
15 sec
If there is no operation for 15 seconds, the menu disappears.
On
Display is always on until dismissed.
Line Display
Configures if input is displayed [or not] whenever the input is switched.
Value: 5 sec, on
5 sec
Displays for 5 seconds.
Off
Not displayed.
Source Display
Configures whether or not to display the signal, when the input is switched.
Settings: On, Off
On
Display.
Off
Not displayed.
Logo
Configures whether or not to display the "D-ILA" logo upon activation.
Settings: On, Off
On
Displayed for 5 seconds.
Off
Not displayed.
5 Function
Trigger
Configures 12V output to an external device (ex: motorized screen equipped with a trigger function].
Settings: Off, On (Power), On (Anamorphic)
Off
No output.
On (Power)
When projector power is turned on, a 12V control pulse is emitted from the trigger output.
When turning off power, the output of the 12V control signal stops.
During standby mode, an output will occur if the OPERATE button is pressed. After cooling, the output stops
[as the projector returns to standby].
On (Anamo)
Control signals (12V) are emitted when the Anamorphic mode is set from "Off" to "A" or "B". If the Anamorphic mode
is set to "A" or "B", the operation in this state equals "On (Power)".
Off Timer
Establishes a system Power Off Timer.
* If there are no operations, the unit powers off automatically.
* It powers off automatically even while projecting an image.
Settings: Off, 1 hour, 2 hours, 3 hours, 4 hours
56
1080p D-ILA 3D Front Projector
User's Manual
[Blue]
[Upper left]
[On]
[5 sec]
[On]
[On]
[Off]
[Off]
Advertisement
Table of Contents
