Wolf SDC-15 User Manual page 56

Anamorphic The video images are enlarged [stretched] in the vertical direction of the panel resolution. This setting is used when
one uses the anamorphic lens to enlarge them in the horizontal direction.
(*) Anamorphic modes cannot be set when there is a 3D signal input.
If a 3D signal is fed in whenever the Anamorphic modes are set to A or B, the Anamorphic modes are automatically turned Off.
Settings: A, B, Off
A Video with an aspect ratio of 2.35:1 is enlarged in the vertical direction of the panel resolution and projected.
B Video with an aspect ratio of 16:9 are displayed by reducing them in the horizontal direction, without changing their size in
the vertical direction.
Off Used when watching video images other than those with a 2.35:1 aspect ratio while using an anamorphic lens. 2.35:1 video images
are projected without any changes. (Black bands appear on all sides)
Screen Adjust This control may correct for white balance errors, when determined to occur from the non-uniform reflective properties of
the projection screen.
Please adjust to your preference.
Black Level Adjusts black level when used indoors.
Settings: 0 to 10
3-1 Lens Control
This controls each motorized functions of the lens during projector installation.
Focus This function is used to adjust focus.
Zoom This function is used to adjust zoom.
Shift This function is used to adjust shift.
Lens Cover This function is used to set the lens cover position, and whether or not it should be linked with a power supply for
opening/closing, or simply left open.
Settings: Auto, Open
Auto This opens/closes the lens cover when linked to power on/off commands.
Open Regardless if the power is on/off, the lens cover is always open.
Image Pattern An Adjustment pattern can be displayed when setting focus and zoom.
Settings: On, Off
On
During the adjustment, the image pattern is displayed.
The image pattern is displayed in conjunction with the above items.
Off The external input signal is displayed without displaying the image pattern.
Lock This locks the lens adjustment controls
Settings: On, Off
On This turns on the lens "lock" feature. If the remote control button "LENS" button is pressed, a warning message is issued.
Off This enables all lens control functions.
3-2 Pixel Adjust
This fine tunes possible slight color errors in the horizontal/vertical directions of the video Images, in units of 1 pixel.
(*) It is impossible to match all image pixels on the screen. Due to the technology there will always be some gaps.
(*) In case the image is reversed, or upside-down, the horizontal and vertical directions are reversed.
(*) Please perform adjustments on a clear still image.
(*) For fine tuning, the effects of adjustments may be difficult to see on some video images.
Horiz. Red (Move red to the left) 1 to 5 (move red to the right)
Horiz. Green (Move green to the left), 1 to 5 (move red to the right)
Horiz. Blue (Move blue to the left) 1 to 5 (move red to the right)
Vert. Red (Move red down) 1 to 5 (move red up)
Vert. Green (Move green down) 1 to 5 (move green up)
Vert. Blue
(Move blue down) 1 to 5 (move blue up)
SDC-15
[Off]
[Auto]
[On]
[Off]
55
[0]
Off
[3]
[3]
[3]
[3]
[3]
[3]