Table of Contents
Advertisement
SDC-15
1-2-3 Color Management
Custom 1~3
Adjust the 7 color axis (red / orange / yellow / green / cyan / blue / magenta) color as desired and save to memory.
For example you may want to change only the red color of roses. Please adjust to your preference. According to
your adjustments, the input image in the background changes. It is possible to confirm the video image before
adjustment by pressing the "HIDE" button of the remote control.
Pause
Pauses the live image, quite useful when making color adjustments.
Settings: On, Off
On
"Freezes" the image.
Off
"Unfreezes" the image.
Enables you to precisely adjust the 7 colors: red, orange, yellow, green, cyan, blue and magenta, and then to achieve
Color Selection
the desired hue, color saturation and brightness. Please adjust to your preference.
Fine-tune the position of the central axis of the selected color.
Axis Position
Settings: -30 to 30
Hue
Adjust the hue.
Settings: -30 to 30
Saturation
Adjust the color saturation.
Settings: (dim color), -30 to 30 (vivid colors)
Brightness
Adjust the brightness.
Settings: (dark) -30 to 30 (bright colors)
2 Input Signal
HDMI
Select the available HDMI input signal via the submenu "[2-1] HDMI".
COMP.
Component video input selection via the submenu "[2-2] COMP.".
PC
Select PC input via the submenu "[2-3] PC".
Picture Position
An adjustment may be enabled if the edges of the picture are partially missing due to the timing of horizontal and
vertical synchronization signals. The value of the picture position depends on the input signal.
(*) Depending on the input signal, only partial video images can be displayed.
(*) When there is a 3D signal, this adjustment is not possible.
Horiz.
This aligns the horizontal position of the image.
Vert.
This aligns the vertical position of the image.
Aspect (Video)
(*) It is displayed when there is a video signal detected.
(*) If set to3D, ratio is fixed to 16:9.
Three aspect ratio settings: 4:3, 16:9, Zoom
4:3
Sets the screen size of the image to 4:3. For HD signals, left and right sides are reduced.
16:9
Sets the screen size of the video image screen to 16:9. For SD signals left and right sides are expanded.
Zoom
Zooms the video images. (*) For HD signals, this cannot be used.
Aspect (PC)
Sets the video image screen size when a PC video signal is detected.
(*) Is displayed when there is a PC signal input.
Settings: Auto, 1:1, Full
Auto
Positions the video image screen in the center of the display range and fills the screen.
Depending on the size of the video screen, left and right black borders will be drawn.
Just
The video image screen size is displayed with the size of the input image.
Depending on the input video image, the screen will become smaller or part of the input image off the screen may be cut off.
Full
It does not retain the aspect ratio of the video image and fills the entire screen.
52
1080p D-ILA 3D Front Projector
User's Manual
[0]
[0]
[0]
[0]
[16:9]
[Auto]
Advertisement
Table of Contents
