Table of Contents
Advertisement
Hardware Version
Version number of the hardware installed on the switch.
System Name
A user-assigned name for the switch.
System Location
A user-assigned description for the physical location of the switch.
System Contact
The name of the person to contact regarding any problems or
questions with respect to the system. You might also want to include
a phone number or extension.
IP Setup
When you select IP Setup from the Configuration menu, a window similar to
the following appears:
This window is used to determine whether the switch should get its IP
Address settings from the user (Manual), a BOOTP server, or a DHCP server. If
you are not using either BOOTP or DHCP, enter the IP Address, Subnet Mask,
and Default Gateway of the switch. If you enable BOOTP, you do not need to
configure any IP parameters because a BOOTP server automatically assigns IP
configuration parameters to the switch. If you enable DHCP, a Dynamic Host
Configuration Protocol request will be sent when the switch is turned on. Once
you have selected a setting under Get IP From, click Apply to activate the new
settings.
Chapter 4. Configuration through the Web-Based network management module
27
Advertisement
Table of Contents
