Table of Contents
Advertisement
2. Toggle the Action field to Delete.
3. Enter the Username and Old Password for the account that you want to
delete.
4. Highlight APPLY and press Enter to make the deletion of the selected user
effective.
5. You must enter the configuration changes into the NVRAM through the
Save Changes choice on the main menu if you want the new configuration
values to be used after a switch restart.
Basic Setup
The main menu is divided into two sections, Basic Setup and Advanced
Setup. The Basic Setup menus are organized into 12 main categories: Switch
Information, IP Setup, Remote Management Setup, Switch Settings,
Configure Ports, Setup User Accounts (see "Setting up user accounts" on page
35), Utilities, Network Monitoring, Save Changes (see "Saving changes" on
page 37), Reboot (see "Restoring default configuration values" on page 38),
and Logout.
Switch Information
Highlight Switch Information on the main menu and press Enter. The
following window appears:
42
IBM BladeCenter 4-Port Gb Ethernet Switch Module: Installation Guide
Advertisement
Table of Contents
