Electrical System - Chevrolet Trax Owner's Manual

258 Vehicle care
Interior lamps
Courtesy lamps
1. To remove it, prise the opposite
side of the lamp switch using a
flat-blade screwdriver.
(Be careful not to make
scratches.)
2. Remove the bulb.
3. Replace the bulb.
4. Reinstall the lamp assembly.
Tailgate lamp
1. Prise the lamp out with a
screwdriver.
2. Remove bulb.
3. Insert new bulb.
4. Install lamp.

Electrical system

Fuses
Data on the replacement fuse must
match the data on the defective fuse.
Main fuses are located in a box
attached on the battery positive
terminal.
For the needed case, in should be
changed by a repairer.
Before replacing a fuse, turn off the
GO3E10032A respective switch and the ignition.
A blown fuse can be recognised by
its melted wire. Do not replace the
fuse until the cause of the fault has
been remedied.
Some functions are protected by
several fuses.
Fuses may also be inserted without
existence of a function.
Note
Not all fuse box descriptions in this
manual may apply to your vehicle.