Chevrolet Trax Owner's Manual page 222

Hide thumbs Also See for Trax:
Table of Contents

Advertisement

220 Driving and operating
Increasing setting speed
• Turn the adjust wheel to RES/+
and hold it. Your vehicle will
accelerate. Release the adjust
wheel at the desired speed.
• Turn the adjust wheel to RES/+
and release it immediately. The
speed will increase by 1~2 km/h
(0.6~1.2 mph).
Decreasing setting speed
• Turn the adjust wheel to SET/-
and hold it. Your vehicle will
decelerate. Release the adjust
wheel at the desired speed.
• Turn the adjust wheel to SET/-
and release it immediately. The
speed will decrease by 1~2 km/h
(0.6~1.2 mph).
To temporarily accelerate
If you want to speed up temporarily
when the cruise control is on,
depress the accelerator pedal.
Increased speed will not interfere
with cruise control operation or
change the set speed.
To return to the set speed, take your
foot off the accelerator pedal.
Temporary deactivation
 the * button is pressed
 vehicle speed below
approximately 32 km/h (20 mph),
 the brake pedal is depressed,
 the clutch pedal is depressed,
 selector lever in N,
Resume stored speed
If the cruise system is still
activated, the most recent set speed
will automatically resume when the
RES/+ switch is pressed.
Deactivation
Press switch 5, control indicator 5
goes out. Cruise control is
deactivated.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents