Chevrolet Trax Owner's Manual page 243

1. Turn the ignition key to
ON/START with the engine off.
2. Using the MENU button and
adjuster wheel in the turn signal
lever, scroll until you reach
Engine oil life on the Driver
Information Center (DIC).
3. Press the SET/CLEAR button to
TDL169A
reset the oil life to 100%.
4. Turn the key to LOCK.
Be careful not to reset the oil life
display accidentally at any time other
than after the oil is changed. It
cannot be reset accurately.
If the vehicle message code
82(Change engine oil soon) comes
back in the Driver Information Center
(DIC) when the vehicle is started, the
engine oil life system has not reset.
Repeat the procedure.
Remember to reset the engine
oil life system whenever the
engine oil is changed.
GC3N10004B
Vehicle care 241
Caution