Table of Contents
Advertisement
UK INSTALLATION INSTRUCTIONS
IMPORTANT INFORMATION
This appliance may only be installed by someone certified competent to do so.
At the time of printing the only people deemed competent to install this
appliance are those that are CORGI registered for this type of appliance in this
type of location who have a current ACS certificate.
1. Gas safety (Installation & Use) regulations 1998 are the 'Rules in force'. In your
own interest and that of safety, it is law that all gas appliances are installed by
competent persons in accordance with the above regulations. Failure to install
appliances correctly could lead to prosecution. Other persons should NOT attempt to
install this equipment.
2. Building Regulations G3 require installers of unvented systems to be competent to
do so. Competence can be shown by holding a current certificate in Unvented
Domestic Hot Water Systems. If the Infinity is installed in a flow and return, or tank
system, or any other closed system then the system is unvented.
3. Installation must be carried out in accordance with the current issue of the following:
Building Regulations issued by the Department of the Environment
Building Standards (Scotland) Regulations.
I.E.E. Wiring regulations for electrical installations.
Gas safety (Installation and Use) Regulations current issue.
BS 5546
BS 5440
BS 6891
BS 5482
BS 6700
BS 6644
Institute of Gas Engineers Publications
Local byelaws
Water regulations
Health and safety at work etc. Act 1974
IGE/UP/10 Part1 Edition 2.
Building Regulation J and G
Such other specifications and regulations that may supersede or complement the
above documents.
It is the installer's responsibility to ensure that the unit has been installed to all current
requirements.
Please be sure that you are fully aware of your obligations and responsibilities
under these regulations.
18
Hide quick links:
Advertisement
Table of Contents
