Table of Contents
Advertisement
TEMPERATURE CONTROLS - INFORMATION
Do not push the ON/OFF button on the
Master controller after transferring priority
of temperature selection to a Secondary
controller as the system will shut down.
Do Not Turn OFF the Master Controller
If a temperature over 50°C
has been selected on a
controller and priority of
temperature selection is
transferred to another
controller, then back again,
the temperature on the
controller will automatically
drop to 50ºC. If the set
point is 50°C or less it will
not alter. This is a safety
feature.
Depending on the weather conditions
and the length of the pipe between the
heater and the tap in use, there may be a
variation between the temperature
displayed at the controller and the
temperature at the tap.
49°C
50°C
Temperature priority cannot be switched
to another controller when the water is
flowing through the water heater.
Controller 1
in use
Bathroom
Kitchen
Do not clean the control with
solvents or detergents. Use only a soft
damp cloth.
13
X
Controller 2
cannot take
priority
Kitchen
Hide quick links:
Advertisement
Table of Contents
