Hardware Test - Raymarine SeaNet-Alarm Installation And Operation Manual

Hardware test

St-Bridge has a function to test
LED's
●
Pushbutton
●
Alarm Output
●
After SeaNet-Alarm is switched on, it will run in hardware test mode for 10 seconds.
During hardware test mode, the led's will be switched on one after the other.
When the pushbutton is pressed, the alarm output wil be activated.
When the pushbutton is released, the alarm output wil be deactivated.
SeaNet-Alarm V1.0
SeaNet-Alarm Users Manual
Page 17 of 19