Led Wlan; Web - Atlantis Land A02-AP2-W54M Manual

A.1.3 LED WLAN
The WLAN LED on the front panel does not light up.
Steps
1
2
3
A.2 WEB
I cannot access the web configurator.
Steps
1
2
3
The web configurator does not display properly.
Steps
1
2
Wireless MIMO Multi-Function Access Point
Press the "Reset" button on the rear panel of the AP, to set
back to factory default setting.
Please unplug AC Adaptor and replug-it.
If these steps fail to correct the problem, contact your local
distributor for assistance.
Make sure you are using the correct IP address of the
Wireless MIMO Multi-Function Access Point. Check the IP
address of the Access Point (192.168.1.254).
Check Mac Filtering (on Security).
Press the "Reset" button on the rear panel of the AP, to set
back to factory default setting.
Make sure you are using Internet Explorer 5.0 and later
versions.
Delete the temporary web files and log in again.
In Internet Explorer, click Tools, Internet Options and then click
the Delete Files ... button.
When a Delete Files window displays, select Delete all offline
content and click OK. (Steps may vary depending on the
version of your Internet browser.)
A02-AP2-W54M
CORRECTIVE ACTION
CORRECTIVE ACTION
CORRECTIVE ACTION
Pag. 48