Dhcp Server Setup - Atlantis Land A02-AP2-W54M Manual

3.6.4 DHCP Server Setup

•
DHCP Server Status: Show status of integrated DCHP Server module. It
can be Running or Stopped.
•
DHCP Server Operation: Choose the state of integrated DHCP Server
module, press on Apply and after on Save (to take effect). It can be
Running or Stopped. DHCP Server Status will change too.
•
DHCP IP Pool: Select IP range that will be assigned to wireless client.
•
Subnet Mask: Inserire la Subnet Mask (Il valore di default è:
255.255.255.0) assegnati ai vari clients DHCP.
•
Subnet Mask: Insert Subnet Mask value (default value is: 255.255.255.0)
assigned to wireless client.
•
Gateway: Show Default Gateway IP Address (it's not necessarily to be
the IP of Access Point).
•
Manual DNS Configuration: Select this option to assign static DNS
servers to DHCP clients.
•
Primary DNS Server: Show DNS Server IP Address.
•
Secondary DNS Server: Show DNS Serve IP address (it is active when
primary DNS Server doesn't work).
Click on Apply and Save to take effect
Static Lease Management function, allow to assign on a PC (it's necessary
to know the MAC Address) the same IP address. You have to insert MAC
Address and IP assigned to server in the table following explained.
Wireless MIMO Multi-Function Access Point
If another DHCP Server is active in LAN, it's necessary to
disable (or correctly set the device to hevitate any kind of
IP Overlap) this function in Wireless MIMO Multi-Function
Access Point.
A02-AP2-W54M Pag. 39