Enable MAC Filtering(Mac Authentication)
This function permit to filter traffic restricting wireless access on the basis of MAC
address.
It's possible to restrict access at a list of MAC address (or allow access only at a
list of MAC address).
•
Accept ALL: All users can access to AP.
•
Reject Registered MAC Address: All users can access to AP excluded
Mac address specifies in list. Insert MAC address to block and click to
ADD. The contents of field MAC/IP will be move to the list MAC Address
List to be Rejected. To delete MAC from list, select it and click on
REMOVE.
•
Accept Registered MAC Address: Only MAC Address in list can be
allowed to access. Insert MAC address to block and click to ADD. The
contents of field MAC/IP will be move to the list MAC Address List to be
Wireless MIMO Multi-Function Access Point
Check Get MAC address of this host to clone MAC
address of client logged into AP (it is a fast way to add
MAC Address to list).
A02-AP2-W54M
Pag. 33