Wireless Basic Setup - Atlantis Land A02-AP2-W54M Manual

3.6.2 Wireless Basic Setup

In this section, is possible to set Wireless Interface.
•
Status: Show wireless module status. Status can be Running o
Stopped.
•
Operation: Choose to activate or not integrated wireless module, click on
Apply and after on Save (to take effect). Status can be Running o
Stopped.
•
SSID: Service Set Identifier, is a univoque name shared by wireless client
and AP (if it is in Roaming). Using different SSID it is possible to
associate some clients to determinate AP. It is an ASCII string of 32
characters.
•
Mode: Show wireless mode; it can work in exclusive mode (choosing
802.11b o 802.11g) or in hybrid (choosing 802.11b+g). Select operating
mode:
1. G and B: allow to work with IEEE802.11b and IEEE802.11g
devices
2. G Only: allow to work exclusively with IEEE802.11g devices
3. B Only: allow to work exclusively with IEEE802.11b devices
•
Region: Choose Region where Wireless MIMO Multi-Function AP will be
use. Automatically, Wireless MIMO Multi-Function AP set parameters to
respect local law. (For Europe choose Others).
•
Channel: Show wireless channel. ETSI standard (Europe) use channel
from 1 to 13. Click on Search the Best Channel to start an automatic
frequency scanning to find the best trasmission channel.
•
Broadcast SSID Option: To increase WLAN security, it's possible to
disable SSID broadcasting (deselect this option).
Wireless MIMO Multi-Function Access Point
A02-AP2-W54M Pag. 29