Chapter 2: Using Wireless Mimo Multi-Function Access Point; The Front Leds - Atlantis Land A02-AP2-W54M Manual

CHAPTER 2: Using Wireless MIMO Multi-
Function Access Point
2.1 Cautions for Wireless MIMO Multi-Function Access
Point
Do not place the Wireless MIMO Multi-Function Access Point under high
humidity and high temperature. It can damage the Access Point.
Do not use the same power source for Wireless MIMO Access Point with
other equipment.
Do not open or repair the case yourself.
If the Wireless MIMO Access Point is too hot, turn off the power immediately
and have a qualified serviceman repair it.
Place the Wireless Access Point on a stable surface.
Only use the power adapter that comes with the package.
Do NOT upgrade firmware on any Atlantis Land product over a wireless
connection. Failure of the device may result. Use only hard-wired network
connections.

2.2 The Front LEDs

The table below shows the LED Indicator of the Wireless MIMO Multi-Function
Access Point.
LED Meaning
Lights green when it is turn ON.
POWER
Blinking green when device correctly work.
STATUS
Turn off or blinking (2 times at second or more) if it has some
problems.
Blinking green while trasmitting data on WLAN interface.
WLAN
Wireless MIMO Multi-Function Access Point
A02-AP2-W54M Pag. 6