Table of Contents
Advertisement
The indicator lights green when the LAN port is connected to an
LAN
Ethernet network successful. Otherwise, the indicator blinking
green while transmitting or receiving data on the Ethernet
network.
2.3 The Rear Ports
Porte
POWER (DC-IN)
LAN
Reset
Wireless MIMO Multi-Function Access Point
Meaning
Connect the Power Adapter DC plug to the AP's power
jack.
Ethernet
port
connections, connect this port to switch/hub.
If AP is power on:
•
Press reset button for 2/3 seconds; device will
reboot (release reset button when LED STATUS
turn off).
•
Press reset button until the device will reboot (
LED STATUS turn off), only when LED STATUS
will start to blink, release reset button. Now, the
A02-AP2-W54M
with
10/100Mbps
Fast
Ethernet
Pag. 7
Advertisement
Table of Contents
