Internal Scsi Cable - JVC MC-8200LU Instructions Manual

2-4. Internal SCSI cable

The SCSI connections inside the main unit (the Changer) are explained below:
The SCSI board, drive units and an SE (single-ended)/LVC (Low Voltage Differential) conversion board are daisy-chain
connected by an internal SCSI cable. The length of the internal SCSI cable should be about 1.0 meter.
● Connectors that are not used should be capped in order to prevent short-circuiting.
● The physical extremity of the internal SCSI cable of the changer is terminated.
Interior
Drive 6
Drive 5
Drive 4
Drive 3
Drive 2
Drive 1
Library SCSI board
Names and Functions of Parts
Terminator
Internal SCSI (LVD) cable
68-pin external SCSI connector
To host computer (SE/LVD)
SE-LVD conversion board
Terminator
Internal SCSI (SE) cable
E9