Modifying Timer Programmings - JVC LET0239-001A Instructions Manual

Modifying timer programmings

You can confirm, erase, or modify the preset timer
programmings easily.
• Make sure that the clock built in this unit is set
properly.
• Turn on the TV and select an appropriate input (AV)
mode.
• When using the buttons on the unit, make sure that
the HDD lamp on the unit is lit. If not, press DVD/
HDD so that the HDD lamp lights.
• When using the remote control, slide the DVD/TV/
HDD selector to the right (HDD), then press ENTER.
HDD PROGRAMME
ENTER
HDD PROGRAMME
ENTER
1
Show the PROGRAMME LIST screen.
1 Press HDD
PROGRAMME.
/ 2 /
3 ∞ 5
Press / to
2
move to
"PROGRAMME LIST,"
then press ENTER.
2
Select a date for which the timer
programming you want is listed.
/ 2 /
3 ∞ 5
Press / to move
to the desired date, then
press ENTER.
3
Select the timer programming you want to
confirm, erase, or modify.
∞ 5
Press or to move to
select one of the timer
programmings listed for the
date, then press ENTER.
4
Confirm, erase, or change the timer
programming.
To cancel the programming, press 2 to move
"CANCEL," then press ENTER.
\ Press HDD PROGRAM to finish.
To confirm or change the contents of the programming
Press ENTER after making sure that
1
"MODIFY."
• The calendar appears again.
2 Press ENTER again after making sure that the selected
date is correct.
Confirm the content, or modify it by referring steps 4
3
to p of "Express Timer programming" on pages 42
and 43.
45
to
is pointing at