Hdd Recording/Playback; Basic Recording - JVC LET0239-001A Instructions Manual

HDD RECORDING/PLAYBACK

Basic recording

You can store up to 100 programmes in the HDD.
Once recording (including timer recordings: see pages 40
and 42) is made through the built-in TV tuner, the
following information about the programme is
automatically memorized in the HDD.
• Thumbnails* (index—still picture of the beginning of
the programme)
• Programme title*
• Category*
• Date and time
• Channel
• Recording speed
• Recording time
* The items marked with an asterisk (*) can be later modified
using HDD Navigation (see page 34).
• Turn on the TV and select an appropriate input (AV)
mode.
• If the unit is turned on with the HDD deck selected,
it takes about 20 seconds until the broadcast picture
appears on the TV. During this period, no
operations are permitted.
•
You cannot record from the built-in DVD player onto the
HDD.
1 5
2
-1
5
2
-2
1
On the remote control
Press
On the unit
Press
• The lamp corresponding to the previously selected
deck (either DVD or HDD) lights on the unit.
2
On the remote control
1
2
On the unit
Press DVD/HDD so that the HDD lamp lights.
• The currently received programme appears on the TV.
Notice that the scene shown on the TV is always a few
second behind the actual on-air scene.
3
On the remote control
Press HDD/TV PR +/– repeatedly or the number buttons.
On the unit
Press PR +/– repeatedly.
3 2
• You can also select the external components—L-1, L-2
(or SAT), F-1.
Examples: How to use the number buttons
To select programme position 5, press 5.
To select programme position 10, press 1, then 0.
To select the external components, press AUX (0), then PR +/–.
NOTES
• When you change the programme positions, it takes a few
seconds to change the pictures. It is not a malfunction.
• When connecting a TV with TV-Link or with equivalent
1
function (see page 15) using the SCART cable, select "OFF" for
"DIRECT REC" (see page 67) in order to record S-Video signals
3
through the L-2 IN or INPUT F-1 connector.
4
On the remote control only
Press REMAIN/REC MODE on the remote control.
• For details on the recording speed, see page 24.
5
4
On the remote control
Press and hold REC
3
On the unit
Press
• The lamp next to the
Turn on the power.
.
STANDBY/ON.
Select the HDD deck.
Make sure that the DVD/TV/HDD selector set to the
right (HDD).
Press LIVE.
The HDD lamp lights on the unit.
Choose a programme.
Set the recording speed.
Start recording.
¶
, then press
¶
(record).
¶
(record) button lights.
23
3
.