Replacing A Wheel; Collapsible Spare Wheel - Ferrari California Owner's Manual

Replacing a wheel

Important note
If one or more wheels need to be replaced, proceed as follows:
• replace the wheel stud bolts with damaged threads or tapers
• carefully clean the wheel stud bolts before fitting
• do not lubricate the contact surfaces between the stud bolt
and the wheel rim and between the wheel rim and the brake
disk.
In order not to remove the antilock coating, do not clean the
wheel rim cones with solvents or aggressive products.

Collapsible spare wheel

On request, the vehicle comes with a kit containing:
• collapsible spare wheel A with space-saving tyre; the label
indicates the maximum speed allowed of 80 km/h
� �
• additional tool bag
wheel stud bolts.
Warning
The spare wheel must only be used for short trips in the event
of an emergency.
When the spare wheel is fitted, never exceed the maximum
speed of 80 Km/h (50 mph) and drive carefully, especially
around bends and when overtaking, avoiding sudden
accelerating or braking.
Do not exceed the approved weight limits.
Do not fit snow chains on the spare wheel.
Never fit more than one spare wheel at a time.
Important note
B
Failure to comply with these instructions could lead to loss of
control of the vehicle and consequently damage to the vehicle
and injuries to its occupants.
�
· Advice for Emergency Situations ·
C containing: jack and wrench to fasten the
5
• 199