Operation With The Engine Off - Ferrari California Owner's Manual

Operation with the engine off

The vehicle is equipped with an electro-hydraulically controlled
gearbox system by means of paddles on the steering wheel.
The default setting for the DCT gearbox is always "Automatic"
mode.
Every time the vehicle is started, the DCT gearbox is in "Auto easy
exit" mode unless the vehicle was in "Automatic" mode when it
was turned off.
To exit the "Auto easy exit" mode simply operate the UP or DOWN
paddles (while the vehicle is moving) or press the AUTO button on
the centre console.
Once the "System start-up" stage has been completed, the engaged
gear will appear on the DOT MATRIX display:
N (Neutral)
P (Parking)
R (Reverse gear)
(1 gear)
1 st
2 (2 gear), etc.
nd
If the indication flashes (may also occur with N) it means that the
gear is not perfectly engaged or disengaged; therefore, request N
and then the desired gear.
Important note
Immediately release the UP and DOWN paddles and the button
R after the display shows that the gear has been engaged; a
prolonged manoeuvre will cause the failure warning light to
turn on (see page 142 "Generic failure") and trigger the buzzer.
Do not operate the system with the engine off to prevent the
battery from discharging.
Also avoid unnecessary gearshifting when the engine is off, in
order to prevent the system pump from overheating.
����
· Quick reference guide ·
��
2
• 49