User Set Mode - Icom IC-F5020 Series Instruction Manual

■ User set mode

User set mode can be accessed with 'Power ON' function. In
this case, all set mode items are available.
User set mode allows you to set seldom-changed settings
and you can "customize" the transceiver operation to suit
your preferences and operating style.
Entering the user set mode:
q While pushing and holding [P1] and [P2], push [
the power ON.
• Turn power OFF in advance.
• Push and hold [P1] and [P2] continuously until "SET MODE"
appears on the display.
[P1] [P2]
w Push and hold [P0] for 1 sec. to enter user set mode.
[P0]
] to turn
[ ]
e Push [P0] several times to select the appropriate item.
Then, push [Up] or [Down] to set the desired level/condi-
tion.
• Available set mode functions are Backlight, Beep, Beep Level,
SQL Level, AF Min Level, Mic Gain, Horn, Battery Voltage,
Signal Moni and Lone Worker.
[P0]
r Push and hold [ ] for 1 sec. to turn power OFF, then ON
again to exit set mode.
User set mode is also available using a programmable key.
Please refer to p. 6 [User Set Mode] section for instructions
regarding using the key assigned for user set mode.
[User Set Mode] is allowed for the quick item selection. Set
"Enable" for the often used items with the CS-F3020/F5020
.
cloning software
2
BASIC OPERATION
[Up]/[Down]
[ ]
2
11