Anel Descri.tion .Anel Descri.tion; Front Panel - Icom IC-F5020 Series Instruction Manual

■ Front panel

q
t
q AF VOLUME CONTROL KNOB [VOL]
Rotate the knob to adjust the desired audio output level.
• Minimum audio level is pre-set. (p. 11)
w U./DOWN KEYS [CH Up]/[CH Down]
Push to select an operating channel, etc.
* The desired function can be assigned by your dealer. (p. 3)
e .OWER KEY [ ]
Push to turn the power ON and OFF.
• The following functions are available at power ON as options:
- Automatic scan start
- Password prompt
- Set mode
r DEALER-.ROGRAMMABLE KEYS
Desired functions can be programmed independently by
your dealer. (p. 3)
Function display (p. 2)
.ANEL DESCRI.TION
w e
Speaker
t MICRO.HONE CONNECTOR
Connect the supplied or optional microphone.
NEVER connect non-specified microphones. The pin
assignments may be different and the transceiver may
be damaged.
D MICRO.HONE
The supplied microphone has a PTT switch and a hanger hook.
• The following functions are available when the microphone is on or
off hook (depending on the setting):
- Automatic scan starts when it is on hook.
- Scan is cancelled when it is off hook.
- Scan is paused when it is off hook.
- Automatic priority channel selection is available when it is off
hook.
- Sets to 'Inaudible' condition (mute condition) when it is on hook.
- Sets to 'Audible' condition (unmute condition) when it is off hook.
1
r
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1