Lcd Display - Dell 3115cn Service Manual

5.4

LCD Display

Problem Error Message
Paper Jam
071-100 Printer
Open Tray1
Remove Paper
Flip
Open & close
Front Cover
Paper Jam
072-100 Printer
Open Tray2
Remove Paper
Flip
Open & close
Front Cover
Paper Jam
075-100 Printer
Check MPF
Remove Paper
Flip
Open & close
Front Cover
Paper Jam
077-900 Printer
Paper Jam
Open Front Cover
Remove Paper
Paper Jam
077-901 Printer
Open Front Cover
Remove Paper
Paper Jam
077-903 Printer
Open Tray1
Remove Paper
Flip
Open & close
Front Cover
Paper Jam
077-907 Printer
Open Front Cover
& Belt Unit
Flip
Remove Paper
Version 1 2006.11.21
Error Contents
<IOT 250 Feeder Misfeed JAM>
The Regi sensor is not turned on within the specified
time.
<IOT Option Feeder Misfeed JAM>
The Regi sensor is not turned on within the specified
time.
<IOT MPF Misfeed JAM>
The Regi sensor is not turned on within the specified
time.
<IOT Remaining Paper JAM>
-The paper remains at the Exit Sensor.
-The paper does not reach the Exit Sensor within the
specified time.
-The paper passed Exit Sensor earlier than the
specified times.
<IOT Remaining Paper JAM>
-The paper remains at the Regi Sensor.
-The paper does not reach the Exit Sensor within the
specified time after the Regi Sensor is ON.
-The paper does not pass through the Regi Sensor
within the specified time.
<IOT Feed JAM>
The arrival time of the regi sensor is early than the
specified time.
<IOT Remaining Paper JAM>
-The paper remains at the Dup Jam Sensor.
-The paper reached Dup Jam Sensor earlier than
the specified time.
-The paper passed Dup Jam Sensor earlier than the
specified time.
-The paper does not pass through the Dup Jam
Sensor within the specified time.
-The paper does not reach the Regi Sensor within
the specified time, after the Dup Jam Sensor is ON.
Chapter 1 Troubleshooting
Relevant
FIP
FIP-1. 37
FIP-1. 38
FIP-1. 39
FIP-1. 40
FIP-1. 40
FIP-1. 41
FIP-1. 42