Fip-1 - Dell 3115cn Service Manual

FIP-1. 40 Paper Jam 077-900/077-901
If the paper actually loaded in the tray or cassette does not match the [Paper Tray]
setting under [Tray Setting], continuing printing in that status may cause a jam
eventually.
Possible causative parts:KIT FEEDER (PL3.2.99)
Yes
Replace the paper or the
transparency with a new
and dry one.
Checking the Front Cover
latching
Open and close the Front
Cover, check the latching.
Yes
A
Version 2 2007.05.22
FUSER ASSY (PL6.1.10)
DRIVE ASSY MAIN (PL8.1.2)
DRIVE ASSY PH (PL8.1.7)
PWBA MCU (PL9.1.20)
Checking the paper
condition
Is the paper or the
No
transparency in the
Tray wrinkled or
damaged?
No
Does the error still
occur when printing?
Checking the paper type
Check the paper type below.
- Paper in the cassette or the tray.
- Paper type setting by the control
panel.
Yes
Are these paper type
same?
Yes
Replace the FUSER ASSY.
END
Chapter 1 Troubleshooting
No
Change the paper type
No
Does the error still
occur when printing?
END