Replacement 52 INTERLOCK SWITCH (PL13.5.3)
1)
2)
1)
Replace the INTERLOCK SWITCH by mating the hole on the INTERLOCK SWITCH with
the boss on the printer.
2)
Secure the INTERLOCK SWITCH to the printer using the one screw (silver, tap, 16mm).
3)
Route the harness of the INTERLOCK SWITCH to the DUCT DRV MAIN.
4)
Route the harness of the INTERLOCK SWITCH through the hole of the printer.
5)
Engage the connector (P/J44) of the INTERLOCK SWITCH to the LOW VOLTAGE POWER
SUPPLY.
6)
Secure the harness of the INTERLOCK SWITCH with the one clamp.
Go to the next replacement step:
Replacement 60 BOX ASSY FAX AIO (PL13.4.4)
Version 1 2006.11.28
Chapter 3 Removal and Replacement Procedures (RRPs)
3)
4)
3 - 188
6)
5)
Gnb03196KA