Table of Contents
Advertisement
EN
EN
EN
EN
Normal Playback
Power Zoom Lever (VOL.)
Lock Button
Stop Button (STOP (8))
VIDEO/MEMORY
Switch
SELECT/SET Button
1
Load a cassette. (
2
Set the VIDEO/MEMORY Switch to "VIDEO".
3
Set the Power Switch to "PLAY" while pressing
down the Lock Button located on the switch.
4
To start playback, press PLAY (4/9).
5
To stop playback, press STOP (8).
During Stop mode, press REW (3) to
rewind, or FF (5) to fast-forward the tape.
Speaker
Power Switch
Rewind Button (REW (3))
Play/Pause Button
(PLAY (4/9))
Fast-Forward
Button (FF (5))
+/- Button
MENU Button
pg. 15)
NOTES:
Clean the video heads using an optional dry
cleaning cassette when:
• No picture during playback.
• Blocks of noise appear during playback.
For details,
pg. 75.
If Stop mode continues for 5 minutes when power
is supplied from a battery, the camcorder shuts off
automatically. To turn on again, set the Power
Switch to "OFF", then to "PLAY".
The playback picture can be viewed in the LCD
monitor, viewfinder or on a connected TV.
(
pg. 22)
You can also view the playback picture on the
LCD monitor with it flipped over and pushed
against the camcorder body.
LCD monitor/viewfinder indications:
• When power is supplied from a battery: the
"
" battery indicator is displayed. (
• When power is supplied from an AC outlet: the
"
" battery indicator does not appear.
When a cable is connected to the S/AV connector,
the sound is not heard from the speaker.
To control the speaker volume...
Slide the Power Zoom Lever (VOL.) towards "+" to
turn up the volume, or towards "–" to turn down the
volume.
Still Playback
Pauses during video playback.
1) Press PLAY (4/9) during playback.
2) To resume normal playback, press PLAY (4/9)
again.
If still playback continues for more than about
3 minutes, the camcorder's Stop mode is
automatically engaged.
When PLAY (4/9) is pressed, the image may
not pause immediately while the camcorder
stabilizes the still image.
VIDEO PLAYBACK
pg. 84)
Advertisement
Table of Contents
