Table of Contents
Advertisement
!& !& !& !&
EN
EN
EN
EN
Automatic demonstration mode
Demonstrates certain functions such as Program AE
with special effects, etc., and can be used to confirm
how these functions operate. (
DEMO MODE
OFF: Automatic demonstration will not take
place.
ON: Demonstrates certain functions such as
Program AE with special effects, etc., and can be
used to confirm how these functions operate.
Demonstration starts in the following cases:
•When the Menu Screen is closed after "DEMO
MODE" is turned "ON".
•With "DEMO MODE" set to "ON", if there is no
operation for about 3 minutes after the Power
Switch is set to "A" or "M".
Performing any operation during the
demonstration stops the demonstration
temporarily. If no operation is performed for more
than 3 minutes after that, the demonstration will
resume.
NOTES:
If a cassette is in the camcorder, the
demonstration cannot be turned on.
"DEMO MODE" remains "ON" even if the
camcorder power is turned off.
If "DEMO MODE" remains "ON", some functions
will not be available. After viewing demo, set to
"OFF".
Priority setting
When the viewfinder is pulled out while the LCD
monitor is opened, you can select which one to use.
PRIORITY
LCD: Allows you to use the LCD monitor.
FINDER: Allows you to use the viewfinder.
Resetting menu settings
CAM RESET
EXECUTE: Resets all settings to the factory-preset.
RETURN: Does not reset all settings to the factory-
preset.
pg. 9)
(Factory-preset: ON)
(Factory-preset: LCD)
RECORDING MENUS (cont.)
Display Menu
CAMERA DISPLAY
Display setting
ON SCREEN
LCD: Keeps the camcorder's display (except the
date, time and time code) from appearing on the
connected TV screen.
LCD/TV: Makes the camcorder's display appear
on screen when the camcorder is connected to a
TV.
Date and time display setting
DATE/TIME
OFF: The date/time does not appear.
AUTO: Displays the date/time for approx.
5 seconds when the Power Switch is set from
"OFF" to "A" or "M".
ON: The date/time is always displayed.
Time code setting
TIME CODE
OFF: Time code is not displayed.
ON: Time code is displayed on the camcorder
and on the connected TV. Frame numbers are not
displayed during recording.
Clock adjustment
CLOCK ADJ.
Allows you to set the current date and time.
(
pg. 14)
(Factory-preset: LCD/TV)
(Factory-preset: AUTO)
(Factory-preset: OFF)
Advertisement
Table of Contents
