Table of Contents
Advertisement
The "NAVIGATION SEARCH" indication
appears blinking and the camcorder starts
searching the tape for the relevant point of the
selected thumbnail image.
To cancel NAVIGATION search midway...
Press PLAY (4/9), REW (3), FF (5) or STOP
(8).
To add thumbnail images during video
playback
1
Perform steps 1 to 4 in "To find scenes on tape
using thumbnail images (NAVIGATION Search)".
2
Press PLAY (4/9) to start video playback.
3
Press NAVI STORE at the desired point.
The "
" indicator appears briefly and the
image of the point where NAVI STORE is
pressed is stored in the memory card as a
thumbnail image.
To delete thumbnail images
1
Load a memory card. (
2
Set the VIDEO/MEMORY switch to "VIDEO".
3
Set the Power Switch to "PLAY" while pressing
down the Lock Button located on the switch.
4
Press MENU. The Menu Screen appears.
5
Press + or – to select "t", and press SELECT/
SET. The VIDEO Menu appears.
6
Press + or – to select
"NAVI.DEL.", and press
SELECT/SET. The Sub
Menu appears.
7
By pressing + or – ...
Select "IMAGE SEL." to
delete the currently displayed thumbnail image.
Select "TAPE SEL." to delete all thumbnail images
for the tape which contains the currently
displayed image.
Select "ALL" to delete all thumbnail images
stored in the memory card at once.
8
Press SELECT/SET. The
NAVIGATION screen
appears.
9
Press + or – to select
"EXECUTE", and press
SELECT/SET.
Press REW (3) to display the previous
image. Press FF (5) to display the next
image.
To cancel deletion, select "RETURN".
Thumbnail images cannot be deleted during
video playback.
pg. 16)
V
I D O
E
SO N
U D M
O
D
E
–
ST
E
R
E
O
1 2 i
b
t M
OD
E
–
SO
U
N
D
1
SY C
N
HRO
–
± 0
0 .
RE
C
MOD
E
–
CO Y
P
–
OF
F
NA I
V . DE
L .
BL N
A K S
RC
H
S / V
A
I N
PU
T
–
OF
F
RETUR
N
NAV
I G
A
T I O
N
DEL
ETE
CURRENT ?
D
E
C
2
6
' 0
3
3
:
0
0
P
M
EXECUTE
RETURN
CAUTION:
Do not remove the memory card or perform any
other operation (such as turning off the camcorder)
during deletion. Also, be sure to use the provided
AC Adapter, as the memory card may be corrupted if
the battery becomes exhausted during deletion. If
the memory card becomes corrupted, initialize it.
NOTE:
Once images are deleted, they cannot be restored.
Check images before deleting.
IMPORTANT:
Be sure to always use the same tape and memory
card together as they were during recording;
otherwise, the camcorder cannot recognize Tape
and Memory Card IDs to perform NAVIGATION
function properly.
Check if an appropriate tape and memory card are
loaded when the following messages appear: "NO
ID ON TAPE OR CARD", "UNABLE TO USE
NAVIGATION", "THIS MEMORY CARD IS NOT
COMPATIBLE".
If you change the memory card while shooting on
one tape, two memory cards will share the tape's
thumbnail images. We recommend that you use
one memory card for one tape.
NAVIGATION Search does not work if the current
position is at a blank portion on the tape. Also, do
not leave a blank portion partway through the tape
when shooting; otherwise, NAVIGATION function
does not work properly.
Before shooting newly over a recorded tape, be
sure to delete all thumbnail images of the previous
recording from the relevant memory card.
If you copy thumbnail images from one memory
card to another via a PC, NAVIGATION Search
does not work with the copied memory card.
"' "' "' "'
EN
EN
EN
EN
Advertisement
Table of Contents
