Chapter 7 Rs507 Bluetooth Connection Using Hid And Spp Profiles; Introduction; Rs507 To Computer Bluetooth Connection Modes - Motorola RS507-IM2xxxxSTWR Product Reference Manual

Chapter 7 RS507 Bluetooth Connection Using
HID and SPP Profiles

Introduction

The RS507 is designed to connect over Bluetooth (BT) and also operate hand in hand with a personal computer or
non-Motorola terminals. This chapter describes the Bluetooth connection modes of the RS507 to a personal
computer and non-Motorola terminals.
This chapter includes the following sections:
•
RS507 to Computer Bluetooth Connection Modes on page 7-1
•
RS507 Important hardware features on page 7-2
•
Refreshing Boot Choices on page 7-3
•
HID (Human Interface Device) Mode on page 7-3
•
Serial Port Profile (SPP) Mode on page 7-18
•
Firmware upgrade on page 7-38
•
Retrieving the RS507 log file on page 7-43
•
Bluetooth Bar Codes on page 7-47

RS507 to Computer Bluetooth Connection Modes

The RS507 can connect to a computer over Bluetooth (BT) using the Serial Port Profile (SPP) or Human Interface
Device (HID) BT modes.
SSI (SCAN) Mode
SSI Simple Serial Interface (SCAN) is the default mode before changing to operate in SPP or HID Bluetooth mode.
SSI (SCAN) mode is also used when the RS507 is connected to a Motorola MPA-based mobile terminal or when
using the PC Tool application (Upgrading using a computer and the PC Tool application on page 7-38).