•
The RS507 Scan LEDs start flashing green indicating that the RS507 is attempting to establish connection
with the computer. The following notifications are displayed upon successful connection.
SPP - Device Successfully Added Screen
Figure 7-26
NOTE In case you do not hear the connected beep on the RS507, press on the RS507 Restore key to connect.
SPP connection with RS507 as a Slave
Right click the BT icon and select Open Settings > Add Device.
1.
SPP connection with RS507 as a Slave - Open Settings
Figure 7-27
RS507 Bluetooth Connection Using HID and SPP Profiles 7 - 23