Table of Contents
Advertisement
3 - 10 RS507 Hands-Free Imager Product Reference Guide
Cleaning the Imager
Wipe the exit window periodically with a lens tissue or other material suitable for cleaning eyeglasses.
Do not pour, spray, or spill any liquid on the Imager.
CAUTION
The gold plated battery contacts do not tarnish or oxidize. No maintenance should be needed. If the contacts need
to be cleaned:
Wet the tip of a cotton swab with isopropyl alcohol and squeeze the excess alcohol from the swab.
1.
Wipe the metal contacts with the damp swab.
2.
Maintaining the Charger
The Charger is well constructed and durable; however, it is a precision electronic device and must be treated as
such.
Follow the procedures in this section to ensure reliable service.
Operating conditions for the Charger
The Charger is designed to operate in environments that are normally free of dust, dirt, and moisture. It can be
operated at temperatures between 0°C (+32°F) and +40°C (+104°F).
Handling the Charger
•
Do not attempt to open the Charger. No user-serviceable parts are inside.
•
Charge only Lithium-ion batteries that have been designed for use with the Imager. Do not attempt to
recharge other types of rechargeable batteries or any type of primary batteries.
•
Do not place objects other than Imager batteries inside the Charger.
•
Protect the Charger from excessive heat, cold, moisture, and harsh, dirty environments.
•
Do not leave the Charger where moisture will condense on it.
Cleaning the Charger
Do not pour, spray, or spill any liquid on the Charger.
CAUTION
The gold plated battery contacts do not tarnish or oxidize. No maintenance should be needed. If the contacts need
to be cleaned:
Remove power from the Charger.
1.
Wet the tip of a cotton swab with isopropyl alcohol and squeeze the excess alcohol from the swab.
2.
Wipe the metal contacts with the damp swab.
3.
Hide quick links:
Advertisement
Table of Contents
