Motorola RS507-IM2xxxxSTWR Product Reference Manual page 213

7 - 44 RS507 Product Reference Guide
Click the Show Bluetooth Address barcode button.
6.
Manually enter the computer BD address and click the Generate button..
7.
Bar Code Generator - PC Tool Application
Figure 7-56
NOTE The PC Tool application retains the last BD address entered so next time press the Generate button to
recreate the bar code image.
To start the connection process, aim the RS507 at about 7" (18 cm) away from the front of the computer screen
8.
and scan the bar code of the computer (or the other target device) BD address. The RS507 Scan LEDs start
flashing green indicating that the RS507 is attempting to establish connection with the computer.
If the following Windows pops up, check the box Always allow this device to access this service and click
9.
OK.
The RS507 bleeps, establishes the SSI over SPP connection and is ready log file retrieval.
10.
Select BT COM port assigned to the RS507.
11.
NOTE The RS507 can connect to a computer or other device that supports Bluetooth Serial Port Profile interface
as either a Master (the RS507 initiate the connection) or a Slave (the computer or other device initiate the
connection and the RS507 is discovered by the computer).