Set Up The System - KVH Industries TV3 Installation Manual

17

Set Up the System

Before you begin to set up the system:
• Know the service provider and associated
satellite(s)
• Check the latest software version (described
below)
• Verify all system components are connected
Access the Web Interface – Wireless
To access the web interface from any
Wi-Fi-enabled mobile device:
a. Select the TVHub-<TV-Hub serial number>
network from your device's Wi-Fi settings to
connect to the TV-Hub.
b. Start a browser and enter http://tvhub.kvh.
The Setup Wizard's home page appears upon
initial startup to step you through system
configuration (see Figure 39).
Alternate Interface Access Options
Other options for connecting to the TV-Hub web
interface include:
• Connect a PC configured for DHCP directly
to the Ethernet port on the back of the
TV-Hub (see Figure 40).
Once you have connected the PC, enter
http://169.254.253.1 into your web browser.
• When connected to a vessel's onboard
network (see "Connect to a Network" on
page 19), enter the IP Address (dynamic or
static) assigned to the TV-Hub.
NOTE: The TV-Hub is Bonjour
can use Bonjour to connect to the TV-Hub using a
computer on the same network without using the
IP address if Bonjour is installed and enabled.
24
Figure 39: Setup Wizard
Figure 40: Wired Connection
TV-Hub
®
-enabled. You
Ethernet
10-30VDC IN
169.254.253.1