16
Turn On the System
Follow these steps to turn on the system for the
first time.
a. Ensure the antenna has a clear, unobstructed
view of the sky.
b. Press the power switch on the rear of the
TV-Hub to apply power to the TracVision
system (see Figure 37).
c. Within a few minutes, the TV-Hub and
Power lights should be lit green, and the
Antenna light should be lit or flashing green
(see Figure 38).
d. Plug in and turn on any connected receivers,
DVRs, Genie clients, and televisions.
e. Follow the steps in the next section to access
the web interface and set up the TracVision
system for the customer's service provider.
Figure 37: TV-Hub Power Switch
Power Switch
10-30VDC IN
TV-Hub
Figure 38: TV-Hub Status Lights
TV-Hub Antenna Power
23