Table of Contents
Advertisement
Rear Panel
Cord Hook
AC Adaptor Jack
Cord Hook
To prevent the inadvertent disruption of power to
your unit (should the plug be pulled out accidentally),
and to avoid applying undue stress to the AC adaptor
jack, anchor the power cord using the cord hook, as
shown in the illustration.
AC Adaptor Jack
Use the AC adaptor (BRC-Series) included with this
unit.
OUTPUT Jacks
Connect cables from here to the input jacks on your
other equipment.
8
OUTPUT Jacks
Ground Lift Switch
Phase Switch
OUTPUT LEVEL
PHANTOM Power Switch
INPUT Jack
INPUT LEVEL
Switch
OUTPUT LEVEL Switch
Use this switch to select the output appropriate for the
input level of the equipment being connected. For
output to a device expecting microphone-level input,
switch to "Mic -40 dBm."
Phase Switch
Ordinarily, this should be set to "NOR" (normal). Set
it to "INV" when you need output that has the phase
(polarity) inverted.
Ground Lift Switch
Should ordinarily be set to "NOR" (normal). If noise
arising from a ground loop should occur (while using
balanced connections), switch it to "LIFT."
INPUT Jack
Accepts connection of microphones, or the output
from external equipment. Features jack for both XLR-
3-31 connectors as well as standard TRS phone plugs.
Switch
Advertisement
Table of Contents
