How To Replace The Electronic Oven Control; Section D - Replacement Of Parts - Electrolux Built-in Wall Oven Service Manual

Section D - Replacement of parts

3.0 HOW TO REPLACE THE ELECTRONIC OVEN CONTROL

1. Disconnect wall oven from electrical supply.
2. Remove wall oven from the cabinet. (section 1.0)
3. Remove the panels to access oven control. (section 2)
4. Remove the 3 screws on front under the control panel.
(Figure 4)
5. Lift the control panel by tilting it toward the rear of the
appliance. (Figure 5)
6. Remove the 4 screws holding the oven control. (Figure
6)
7. Replace the oven control and reassemble in reverse
order.
33
Figure 4
Figure 5
Figure 6