34
Section D - Replacement of parts
4.0 HOW TO REPLACE CONVECTION MOTOR
Figure 7
Figure 8
Figure 9
1. Disconnect wall oven from electrical supply.
2. Remove wall oven from the cabinet. (section 1.0)
3. Remove the back panel to access convection motor.
(section 2.0)
4. By the inside of the oven remove the 3 screws holding
the convection fan cover. (Figure 7)
5. Remove the nut holding the fan blade by turning it
counterclockwise. (Figure 8)
6. Remove the 3 screws holding the motor. (Figure 9)
7. Disconnect the 2 wires.
8. Replace the motor and reassemble in reverse order.