Fluke 45 Function Commands And Queries - Fluke 8845A Programmer's Manual

Function Commands and Queries
The commands in Table 21 lists the measurement function commands for the Fluke 45.
See Tables 22A and 22B for ranges and measurement rates. Commands under Primary
Display and Secondary Display cause functions to be performed on the primary display
or secondary display, respectively.
Table 21. Fluke 45 Function Commands and Queries
Commands
Primary Secondary
Display Display
AAC AAC2
ADC ADC2
— CLR2
CONT —
DIODE DIODE2
FREQ FREQ2
FUNC1 ? —
FUNC2?
OHMS OHMS2
VAC2
VAC
VDC VDC2
AC current
DC current
Clears measurement from secondary display if one shown.
Continuity test. Available in the primary display only.
Diode test
Frequency
Meter returns the function selected for the primary display as
command mnemonic.
EXAMPLE: If frequency is selected for the primary display,
"FUNC1?" returns "FREQ".
Meter returns the function selected for the secondary display as
command mnemonic. If the secondary display is not in use, an
Execution Error is generated.
EXAMPLE: If frequency is selected for the secondary display,
FUNC2? returns "FREQ".
Resistance
AC volts
DC volts
FLUKE 45 Command Emulation Summary
Function
Digital Multimeter
69