JRC NCR-333 Instruction Manual page 83

a. Alarm history (ALARM HISTORY)
This screen displays a history of alarms which occur while the power is on. It displays the alarm history
from the most recent one maximum 20 lines.
To return to the NAVTEX ALARM screen, press the CLR key or
NAVTEX ALARM
3.11/12/04 15:30 001 A
antenna malfunction
4.11/12/04 15:30 002 A
power supply error
5.02/11/04 02:31 001 V
antenna malfunction
6.02/11/04 02:19 001 A
antenna malfunction
7.23/09/04 22:15 001 V
antenna malfunction
8.23/09/04 22:15 002 V
power supply error
9.23/09/04 22:14 002 A
power supply error
10.23/09/04 22:13 001 A
antenna malfunction
Procudure
1) To display the next old result, press the ▼ key.
- " " mark is displayed on the bottom line when the alarm history screen is able to be scrolled downward.
- " " mark is displayed on the top line when the alarm history screen is able to be scrolled upward.
- Press the ▲ ▼ key and scroll the viewing area.
The time of an alarm occurred and is restored is displayed when external GPS receiver is connected.
"--/--/-- --:--" is displayed when time is not able to be acquired. (External GPS receiver is not connected.)
The display of the alarm is described.
Alarm message: 001, V, antenna malfufnction
1: The alarm number (refer to the following table)
2: The alarm condition -> "V": Healthy status, "A": Alarm is occurring
3: Alarm's description text (refer to the following table)
The list of NAVTEX alarm
Alarm No.
004
005
006
051
052
053
054
055
056
057
058
2) To print the NAVTEX alarms to the external printer, press the * key in order to display the sub screen.
Select the "[PRINT OUT]", and press the ENT key. Printing is started.
[PRINT OUT]: Printing is started.
[CANCEL]: Diagnosis is canceled, and the sub screen is closed.
Fig.6-16 ALARM HISTORY screen
1 2 3
Alarm's description text
Receiver malfunction
Built in self test failure
General failure
Antenna malfunction
Flash memory error
Rx unit modem error
Printer error
EXT SIO output error
Receiver 1 malfunction
Receiver 2 malfunction
Receiver 3 malfunction
ⅩⅠ
NAVTEX ALARM
3.11/12/04 15:30 001 A
antenna malfunction
4.11/12/04 15:30 002 A
power supply error
5.02/11/04 02:31 001 V
antenna malfunction
*NAVTEX ALARM*
6.02/11/04 02:19 001 A
antenna malfunction
7.23/09/04 22:15 001 V
antenna malfunction
8.23/09/04 22:15 002 V
power supply error
9.23/09/04 22:14 002 A
power supply error
10.23/09/04 22:13 001 A
antenna malfunction
The contents of unusual detection
Unusual detection at the RX
Self diagnosis failure
Unusual detection at the power supply part
Unusual detection of antenna power supply
The data in a memory is broken.
Unusual detection at the modem part
External printer has malfunction
Unusual detection at the "DISP" output port
Unusual detection at the RX1
Unusual detection at the RX2
Unusual detection at the RX3
key.
[PRINT OUT]
[CANCEL]
ⅩⅠ
6-51