Assigning To The User Key (User Key Setting) - JRC NCR-333 Instruction Manual

6.3.3.5 Assigning to the USER key (USER KEY SETTING)

The USER key can be assigned to the often used function (screen).
Select 5. USER KEY SETTING, and press the ENT key. USER KEY SETTING screen appears.
Press the ▲ ▼ key and select from "A" to "Z", and then press the ENT key. "USER KEY" setting is saved.
" " mark is displayed on the bottom line when the USER KEY SETTING screen is able to scroll downward.
" " mark is displayed on the top line when the USER KEY SETTING screen is able to scroll upward.
To display DISPLAY menu screen, press the CLR.
Refer to the following table about selectable items;
A MESSAGE LIST1
B MESSAGE LIST2
C SELECT MESSAGE LIST
D POSITION/ITME
E RX STATION SETTING MENU
F AUTO MODE SETTING
G MANUAL MODE SETTING
H MESSAGE TYPE SETTING MENU
I DISPLAY SETTING MENU
J USER KEY SETTING
K NAVTEX SETTING MENU
L MAINTENANCE MENU
M SELF DIAGNOSIS
N NAVTEX ALARM
O
P PORT MONITOR
Y
Z
USER KEY SETTING
USER KEY: P
-----------------------------------
D:POSITION/TIME
E:RX STATION SETTING MENU
F:AUTO MODE SETTING
G:MANUAL MODE SETTING
H:MESSAGE TYPE SETTING MENU
I:DISPLAY SETTING MENU
J:USER KEY SETTING
K:NAVTEX SETTING MENU
L:MAINTENANCE MENU
M:SELF DIAGNOSIS
N:NAVTEX ALARM
O:STATUS
Fig.6-11 USER KEY SETTING screen
Title
STATUS
PRINT
NON USE
MESSAGE LIST 1 screen is displayed.
MESSAGE LIST 2 screen is displayed.
SELECT MESSAGE LIST screen is displayed.
POSITION/TIME screen is displayed.
RX STATION menu screen is displayed.
AUTO MODE SETTING screen (RX STATION menu) is
displayed.
MAMUAL MODE SETTING screen (RX STATION menu) is
displayed.
MESSAGE TYPE SETTING screen is displayed.
DISPLAY menu screen is displayed.
This screen (SER KEY SETTING) is displayed.
NAVTEX menu screen is displayed.
MAINTENANCE menu screen is displayed.
SELF DIAGNOSIS screen (MAINTENANCE menu) is displayed.
NAVTEX ALARM screen (MAINTENANCE menu) is displayed.
STATUS screen (MAINTENANCE menu) is displayed.
PORT MONITOR screen (MAINTENANCE menu) is displayed.
Printing is started if the USER key is pressed on the screen
which can print the external printer. Printing is stopped if the
CLR key is pressed during printing.
The USER key cannot be used.
ⅩⅠ
Explanation
6-37