Character Size Setting (Character Size); Cer Setting (Cer Disp.setting) - JRC NCR-333 Instruction Manual
Navtex receiver
Hide thumbs
Also See for NCR-333:
- Brochure (2 pages) ,
- Instruction manual (136 pages) ,
- Operation card (2 pages)
Table of Contents
Advertisement
6.3.4.1 Character size setting (CHARACTER SIZE)
Displayed character can be changed into three sizes.
Select
1.CHARACTER
Press the ▲ ▼ key, and then press the ENT key.
If the ENT key is pressed, the selected character size is saved, and the displayed character is changed.
1.CHARACTER SIZE
The initial setting is "NORMAL".
NORMAL:
The normal character size: 13x9 dots
MEDIUM:
The medium character size: 16x9 dots
LARGE:
The large character size: 20x16 dots
6.3.4.2 CER setting (CER DISP.SETTING)
A message text can add "CER
Select
2.CER
DISP.SETTING, and press the ENT key. Cursor moves to the right side of ":".
Press the ▲ ▼ key and select the "ON" or "OFF", and then press the ENT key. This setting is saved
2.CER DISP.SETTING : ON
(CER:CHARACTER ERROR RATE)
The initial setting is "OFF".
ON:
"CER" is displayed on the end of message.
OFF: "CER" is not displayed.
(*1)
: Character Error Rate
(When CER DISP.SETTING is set "ON")
IA01 4209.5
123400 UTC JUNE 04
JAPAN NAVTEX N.W. NR 1260/2004
KEIHIN KO, TOKYO WEST PASSAGE.
DAYTIME DAILY UNTIL 28 JUNE 2004
35-35-02.0N 139-47-55.3E,WGS-84
(END OF MESSAGE
LINE: 18/ 18
6-40
SIZE, and press the ENT key. Cursor moves to the right side of ":".
(*1)
" to the end of message.
15
04/06/09 12:34
CER :
3.5%)
: NORMAL
(When CER DISP.SETTING is set "OFF")
IA01 4209.5
123400 UTC JUNE 04
JAPAN NAVTEX N.W. NR 1260/2004
KEIHIN KO, TOKYO WEST PASSAGE.
DAYTIME DAILY UNTIL 28 JUNE 2004
35-35-02.0N 139-47-55.3E,WGS-84
(END OF MESSAGE)
LINE: 18/ 18
15
04/06/09 12:34
Hide quick links:
Advertisement
Table of Contents
